Flexible connection

• Информационные материалы

  Информационные материалы

  Flexible connection enables fast, direct connection of the SIMATIC S7-300/ET 200 M input/output modules to the individual elements in the control cabinet.

  Attached single cores reduce the wiring outlay.

  Wire cross-sections of 0.5 mm² allow higher currents, too.

  Область применения

  On the front connector with single cores, up to 16 or 32 digital input and output channels can be connected directly with the I/O. The single cores are fitted with screw contacts or crimp contacts and are cut off straight at the other end. The cores can be easily assigned since they are coded in accordance with the pin designations on the front connector.

  The single cores are available as H05V-K version or with UL/CSA certification.

  The UL/CSA single cores are certified in accordance with UL 1007/1569 or TR64.

  Дизайн

  • Front connector with fixed single cores.
  • The front connectors are available in versions with screw-type contacts or crimp contacts.
  • The single cores are available as H05V-K versions or with UL/CSA certification.
  • The cores have a cross-section of 0.5 mm² and imprinted numbers.
  • Cable ties combine the single cores into a bundle.
  • The standard lengths are 2.5 m, 3.2 m and 5.0 m. Special lengths are available on request.

  

  SIMATIC TOP connect for S7-300/ S7-400/ ET200 M, flexible connection

  Особенности

  • Individual cores can be routed directly to each element in the control cabinet
  • Higher currents possible due to greater cross-section with lower voltage drop
  • Reduction in wiring overhead through simple connection of the pre-assembled cable to the I/O module
  • Easy wiring. The number printed on the cores corresponds to the connection point on the I/O connector
  • Clear control cabinet wiring thanks to bundled individual cores