CPU 416

Заказные данные
(3)
Аксессуары
(38)

High-performance CPUs in the high-end performance range
Applicable for plants with high requirements in the high-end performance range
Integrated PROFINET functions in CPU 416-3 PN/DP

Область применения

CPU 416-2, CPU 416-3 and CPU 416-3 PN/DP are powerful SIMATIC S7-400 CPUs.

The integrated PROFIBUS DP interfaces in the CPU 416-2 and CPU 416-3 make it possible to connect directly to the PROFIBUS DP fieldbus as a master or slave.

An additional DP master system can be connected to the CPU 416-3 and CPU 416-3 PN/DP using the IF 964-DP interface module.

The integrated PROFINET interface of the CPU 416-3 PN/DP implements switch functionality. This forms the basis for providing two externally accessible PROFINET ports. In addition to hierarchical network topologies, this also enables the creation of line structures in the new S7-400 controllers.

Note:
Only the interface module 6ES7 964-2AA04-0AB0 can be used.

Дизайн

Both CPUs are equipped with the following:

Powerful processor:
The CPUs achieve instruction execution times as low as 0.03 µs per binary instruction.
CPU 416-2: 8 MB main memory (of which 4 MB each for program and data);
CPU 416-3: 16 MB main memory (of which 8 MB each for program and data);
CPU 416-3 PN/DP: 16 MB main memory (of which 8 MB each for program and data);
fast main memory for parts of the user program relevant to execution.
Flexible expansion:
Up to 262144 digital and 16384 analog inputs/outputs.
Multi-point interface MPI:
With the MPI it is possible to establish simple networking of max. 32 stations at a data transmission rate of up to 12 Mbps. The CPUs can establish up to 44 connections to stations of the communications bus (C bus) and the MPI.
Mode selector switch:
Designed as toggle switch.
Diagnostics buffer:
The last 120 fault and interrupt events are retained in a ring buffer for diagnostic purposes. The number of entries can be parameterized.
Real-time clock:
The date and time are appended to diagnostic messages of the CPU.
Memory card:
For expansion of the integrated load memory. RAM and FEPROM cards (FEPROM for retentive storage) are available.
Combined MPI/DP interface and integrated PROFIBUS DP interface (with CPU 416‑2 and CPU 416‑3):
The PROFIBUS DP master interface allows a distributed automation configuration offering high speed and ease of use. From the user's point of view, the distributed I/O is treated as central I/O (same configuring, addressing and programming).
Mixed configuration: SIMATIC S5 and SIMATIC S7 as PROFIBUS master acc. to EN 50170.

CPU 416-3 and CPU 416-3 PN/DP also include:

1 module slot:
Using the IF 964-DP interface module, an additional PROFIBUS DP master system can be connected.

CPU 416-3 PN/DP additionally includes:

PROFINET interface with 2 ports (switch):
- PROFINET IO, 256 IO devices connectable
- PROFINET CBA

Функции

Block protection:
A password concept protects the user program from unauthorized access.
Integral HMI services:
The user only has to specify the source and destination of the data with HMI devices. The data are then transported cyclically and automatically by the system.
Integrated communications functions:
- PG/OP communication
- Shared data communication
- S7 standard communication
- S7 communication
Firmware update using network

CPU 416-3 PN/DP additional:

Open communication over TCP/IP, UDP and ISO-on-TCP (RFC1006)
Distributed intelligence in Component Based Automation (CBA) on PROFINET
Additional diagnostic options with integrated web server

Parameterizable attributes

The STEP 7 tool "Hardware Configuration" can be used to program the properties and response of the S7-400 including the CPUs, e.g.

Multi-point interface MPI:
- Definition of station addresses.
- Startup/cycle behavior
- Stipulation of the maximum cycle time and communications load
Address assignment:
Addressing of I/O modules.
Retentive ranges:
Definition of the number of retentive bit memories, counters, timers, data blocks and clock memories.
Size of the process image, local data.
Length of the diagnostics buffer
Protection level:
Definition of access authorization for program and data
System diagnostics:
Definition of the handling and scope of diagnostic messages
Timed interrupts:
Setting of periodicity

CPU 416-3 PN/DP additional:

PROFINET interface
Parameterization of time synchronization using NTP procedure

Indication and information functions

Status and error indicators:
LEDs indicate internal and external errors and operating states such as RUN, STOP, Restart, Test function, for example
Test functions:
The programming device can be used to display signal states in program execution, modify process tags irrespective of the user program, read out the contents of stack memories, run separate program steps and inhibit program components
Information functions:
The programming device can be used to provide the user with information on the memory capacity and operating mode of the CPU and the current utilization of the working and load memories

Технические данные

Order number	6ES7416-2XP07-0AB0	6ES7416-3XS07-0AB0	6ES7416-3ES07-0AB0
	CPU 416-2, MPI, PROFIBUS, 8 MB	CPU 416-3, 16 MB, 3 INTERFACES	CPU416-3 PN/DP, 16 MB, 3 INTERFACES
General information
Product type designation	CPU 416-2	CPU 416-3	CPU416-3 PN/DP
Engineering with
● Programming package	STEP 7 V5.4 or higher with HSP 261	STEP 7 V5.4 or higher with HSP 261	STEP 7 V5.5 or higher with HSP 262
Supply voltage
Rated value (DC)
● 24 V DC	No; Power supply via system power supply	No; Power supply via system power supply	No; Power supply via system power supply
Power loss
Power loss, typ.	4.5 W	5.5 W	6.5 W
Memory
Work memory
● integrated	8 Mbyte	16 Mbyte	16 Mbyte
● integrated (for program)	4 Mbyte	8 Mbyte	8 Mbyte
● integrated (for data)	4 Mbyte	8 Mbyte	8 Mbyte
Load memory
● expandable FEPROM, max.	64 Mbyte	64 Mbyte	64 Mbyte
● integrated RAM, max.	1 Mbyte	1 Mbyte	1 Mbyte
● expandable RAM, max.	64 Mbyte	64 Mbyte	64 Mbyte
CPU processing times
for bit operations, typ.	12.5 ns	12.5 ns	12.5 ns
for word operations, typ.	12.5 ns	12.5 ns	12.5 ns
for fixed point arithmetic, typ.	12.5 ns	12.5 ns	12.5 ns
for floating point arithmetic, typ.	25 ns	25 ns	25 ns
Counters, timers and their retentivity
S7 counter
● Number	2 048	2 048	2 048
IEC counter
● present	Yes	Yes	Yes
S7 times
● Number	2 048	2 048	2 048
IEC timer
● present	Yes	Yes	Yes
Data areas and their retentivity
Flag
● Number, max.	16 kbyte; Size of bit memory address area	16 kbyte; Size of bit memory address area	16 kbyte; Size of bit memory address area
Address area
I/O address area
● Inputs	16 kbyte	16 kbyte	16 kbyte
● Outputs	16 kbyte	16 kbyte	16 kbyte
Process image
● Inputs, adjustable	16 kbyte	16 kbyte	16 kbyte
● Outputs, adjustable	16 kbyte	16 kbyte	16 kbyte
Time of day
Clock
● Hardware clock (real-time)	Yes	Yes	Yes
Operating hours counter
● Number	16	16	16
Interfaces
Interfaces/bus type	1 x MPI/PROFIBUS DP, 1 x PROFIBUS DP	1 x MPI/PROFIBUS DP, 1 x PROFIBUS DP, 1 x PROFIBUS DP (optionally pluggable)	1 x MPI/PROFIBUS DP, 1 x PROFINET (2 ports), 1 x PROFIBUS DP (optionally pluggable)
Number of RS 485 interfaces	2; Combined MPI / PROFIBUS DP and PROFIBUS DP	2; Combined MPI / PROFIBUS DP and PROFIBUS DP	1; Combined MPI / PROFIBUS DP
Number of other interfaces		1; PROFIBUS DP with IF 964-DP (plug-in option; MLFB: 6ES7964-2AA04-0AB0)	1; PROFIBUS DP with IF 964-DP (plug-in option; MLFB: 6ES7964-2AA04-0AB0)
1. Interface
Interface type	Integrated	Integrated	Integrated
Physics	RS 485 / PROFIBUS + MPI	RS 485 / PROFIBUS + MPI	RS 485 / PROFIBUS + MPI
Functionality
● MPI	Yes	Yes	Yes
● PROFIBUS DP master	Yes	Yes	Yes
● PROFIBUS DP slave	Yes	Yes	Yes
DP master
● Number of DP slaves, max.	32	32	32
2. Interface
Interface type	Integrated	Integrated	PROFINET
Physics	RS 485 / PROFIBUS	RS 485 / PROFIBUS	Ethernet RJ45
Interface types
● Number of ports			2
Functionality
● PROFINET IO Controller			Yes
● PROFINET IO Device			Yes
● PROFINET CBA			Yes
● PROFIBUS DP master	Yes	Yes	No
● PROFIBUS DP slave	Yes	Yes	No
DP master
● Number of DP slaves, max.	125	125
3. Interface
Interface type		Pluggable interface module (IF), technical data as for 2nd interface	Pluggable interface module (IF)
Plug-in interface modules		IF 964-DP (MLFB: 6ES7964-2AA04-0AB0)	IF 964-DP (MLFB: 6ES7964-2AA04-0AB0)
Physics		RS 485 / PROFIBUS	RS 485 / PROFIBUS
Functionality
● MPI		No	No
● PROFIBUS DP master		Yes	Yes
● PROFIBUS DP slave		Yes	Yes
DP master
● Number of DP slaves, max.		125	125
Isochronous mode
Isochronous operation (application synchronized up to terminal)	Yes; For PROFIBUS only	Yes; For PROFIBUS only	Yes; Via PROFIBUS DP or PROFINET interface
Communication functions
PG/OP communication	Yes	Yes	Yes
Data record routing	Yes	Yes	Yes
Global data communication
● supported	Yes	Yes	Yes
S7 basic communication
● supported	Yes	Yes	Yes
S7 communication
● supported	Yes	Yes	Yes
S5 compatible communication
● supported	Yes; Via FC AG_SEND and AG_RECV, max. via 10 CP 443-1 or 443-5	Yes; Via FC AG_SEND and AG_RECV, max. via 10 CP 443-1 or 443-5	Yes; Via FC AG_SEND and AG_RECV, max. via 10 CP 443-1 or 443-5
Standard communication (FMS)
● supported	Yes; Via CP and loadable FB	Yes; Via CP and loadable FB	Yes; Via CP and loadable FB
Open IE communication
● TCP/IP			Yes; via integrated PROFINET interface and loadable FBs
— Number of connections, max.			94
● ISO-on-TCP (RFC1006)	Via CP 443-1 and loadable FB	Via CP 443-1 and loadable FB	Yes; Via integrated PROFINET interface or CP 443-1 and loadable FBs
— Number of connections, max.			94
● UDP			Yes; via integrated PROFINET interface and loadable FBs
— Number of connections, max.			94
Web server
● supported	No	No	Yes
Number of connections
● overall	96	96	96
Standards, approvals, certificates
Use in hazardous areas
● ATEX	ATEX II 3G Ex nA IIC T4 Gc	ATEX II 3G Ex nA IIC T4 Gc	ATEX II 3G Ex nA IIC T4 Gc
Ambient conditions
Ambient temperature during operation
● min.	0 °C	0 °C	0 °C
● max.	60 °C	60 °C	60 °C
Configuration
Know-how protection
● User program protection/password protection	Yes	Yes	Yes
● Block encryption	Yes; With S7 block Privacy	Yes; With S7 block Privacy	Yes; With S7 block Privacy
Dimensions
Width	25 mm	50 mm	50 mm
Height	290 mm	290 mm	290 mm
Depth	219 mm	219 mm	219 mm
Weights
Weight, approx.	700 g	900 g	900 g

Дальнейшая информация

Brochures

Information material for downloading can be found in the Internet:

http://www.automation.siemens.com/infocenter