MultiRanger 200 HMI

Заказные данные
(1)
Аксессуары
(32)

MultiRanger 200 HMI is a versatile short to medium-range ultrasonic single and multi-vessel level monitor/controller for virtually any application in a wide range of industries.

Область применения

MultiRanger 200 HMI can be used with various materials, including, water, municipal waste, acids, woodchips, or on materials with high angles of repose. MultiRanger 200 HMI offers true dual point monitoring, digital communications with built-in Modbus RTU via RS 485, as well as compatibility with SIMATIC PDM, allowing PC configuration and set-up. MultiRanger 200 HMI features Sonic Intelligence advanced echo-processing software for increased reading reliability.

MultiRanger 200 HMI will monitor open channel flow and features more advanced relay alarming and pump control functions as well as volume conversion.

It is compatible with chemical-resistant EchoMax transducers that are approved for hostile environments.

Key Applications: wet wells, flumes/weirs, bar screen control, hoppers, chemical storage, liquid storage, crusher bins, dry solids storage

Дизайн

The MultiRanger 200 HMI is available in wall or panel mounting options.

Чертеж

MultiRanger 200 HMI, dimensions in mm (inch)

Особенности

Easy to use HMI display with local four-button programming, menu-driven parameters, and Wizard support for key applications
English, German, French, Spanish, Chinese, Italian, Portuguese, and Russian texts on the HMI
Removable terminal blocks for ease of wiring
Digital input for back-up level override from point level device
Communication using built-in Modbus RTU via RS 485 and SIMATIC PDM configuration software
Compatible with SmartLinx system: PROFIBUS DP (cyclic access of process values only) and DeviceNET
Single or dual point level monitoring
Auto False-Echo Suppression for fixed obstruction avoidance
Differential amplifier transceiver for common mode noise reduction and improved signal-to-noise ratio
Level, volume, and flow measurements in open channels, differential control, extended pump control, and alarm functions
Wall and panel mounting options

Схема подключения

MultiRanger 200 HMI connections

Технические данные

Mode of Operation
Measuring principle	Ultrasonic level measurement
Measuring range	0.3 ... 15 m (1 ... 50 ft)
Measuring points	1 or 2
Input
Analog	0 ... 20 mA or 4 ... 20 mA, from alternate device, scalable
Discrete	10 ... 50 V DC switching level Logical 0 ≤ 0.5 V DC Logical 1 = 10 ... 50 V DC max. 3 mA
Output
EchoMax transducer	44 kHz
Ultrasonic transducer	Compatible transducers: ST-H and EchoMax series XPS-10, XPS-15/15F, and XRS-5
Relays	Rating 5 A at 250 V AC, non-inductive
mA output	0 ... 20 mA or 4 ... 20 mA
Max. load	750 Ω, isolated
Resolution	0.1 % of range
Accuracy
Error in measurement	0.25 % of range or 6 mm (0.24 inch), whichever is greater
Resolution	0.1 % of measuring range¹⁾or 2 mm (0.08 inch), whichever is greater
Temperature compensation	-50 ... +150 °C (-58 ... +302 °F) Integral temperature sensor External TS-3 temperature sensor (optional) Programmable fixed temperature values
Rated operating conditions
Installation conditions
Location	Indoor/outdoor
Installation category	II
Pollution degree	4
Ambient conditions
Ambient temperature (housing)	-20 ... +50 °C (-4 ... +122 °F)
Design
Weight
Wall mount	1.22 kg (2.68 lb)
Panel mount	1.35 kg (2.97 lb)
Material (enclosure)	Polycarbonate
Degree of protection (enclosure)
Wall mount	IP65/Type 4X/NEMA 4X
Panel mount	IP54/Type 3/NEMA 3
Electrical connection
Transducer and mA output signal	2-core copper conductor, twisted, shielded, 0.5 ... 0.75 mm² (22 ... 18 AWG), Belden 8760 or equivalent is acceptable
Max. separation between transducer and transceiver	365 m (1 200 ft)
Displays and controls	60 x 40 mm (2.36 x 1.57 inch) LCD 240 x 160 pixels resolution
Power supply
AC version	100 ... 230 V AC ± 15 %, 50/60 Hz, 36 VA (17 W)
DC version	12 ... 30 V DC (20 W)
Certificates and approvals	CE, RCM²⁾ FM, CSA_US/C, UL CSA Class I, Div. 2, Groups A, B, C, and D, Class II, Div. 2, Groups F and G, Class III (wall mount only)
Communication	RS 232 with Modbus RTU or ASCII via RJ-11 connector RS 485 with Modbus RTU or ASCII via terminal strips Optional: SmartLinx cards for PROFIBUS DPV1 (cyclic access of process values only) DeviceNet

¹⁾ Program range is defined as the empty distance to the face of the transducer plus any range extension

²⁾ EMC performance available on request

Полезное

ENG_495945.PDF