1-phase, 12 V DC (PSU100D)

• Заказные данные
  (2)
• Информационные материалы

  Информационные материалы

  The single-phase PSU100Ds are switch mode power supplies for direct wall mounting using screws. The flat and rugged aluminum enclosure with IP20 degree of protection can be installed in various orientations and is therefore ideal for installation locations with limited space or for mounting in control cabinets and enclosures without a DIN rail. The low-cost devices meet all the basic requirements for a power supply, typical applications being apparatus, automated equipment and automation solutions.

  Main product highlights

  • 12 V DC, 3 A and 8.3 A
  • Compact metal enclosure
  • Wide-range input
  • Green LED for "24 V OK"
  • Certification in accordance with CE and UL
  • Adjustable output voltage from 22 to 28 V or from 11 to 14 V for compensating voltage drops
  • Temperature range from -10 °C to +70 °C

  Технические данные

  Order number		6EP1321-1LD00	6EP1322-1LD00
  Product		PSU100D	PSU100D
  Power supply, type		12 V/3 A	12 V/8.3 A
  Input
  Input		1-phase AC	1-phase AC
  Rated voltage value Vin rated		100 ... 240 V	100 ... 240 V
  Voltage range AC		85 ... 264 V	85 ... 264 V
  Wide-range input		Yes	Yes
  Mains buffering at Iout rated, min.		15 ms; at Vin = 115/230 V	15 ms; at Vin = 115/230 V
  Rated line frequency 1		50 Hz	50 Hz
  Rated line frequency 2		60 Hz	60 Hz
  Rated line range		47 ... 63 Hz	47 ... 63 Hz
  Input current
  ● at rated input voltage 100 V		0.75 A	2 A
  ● at rated input voltage 240 V		0.5 A	1.1 A
  Switch-on current limiting (+25 °C), max.		60 A	75 A
  I²t, max.		1.2 A²·s	5.5 A²·s
  Built-in incoming fuse		internal	internal
  Protection in the mains power input (IEC 898)		Recommended miniature circuit breaker: from 10 A characteristic C or from 16 A characteristic B	Recommended miniature circuit breaker: from 10 A characteristic C or from 16 A characteristic B
  Output
  Output		Controlled, isolated DC voltage	Controlled, isolated DC voltage
  Rated voltage Vout DC		12 V	12 V
  Total tolerance, static ±		2 %	2 %
  Static mains compensation, approx.		0.5 %	0.5 %
  Static load balancing, approx.		1 %	1 %
  Residual ripple peak-peak, max.		100 mV	100 mV
  Spikes peak-peak, max. (bandwidth: 20 MHz)		100 mV	100 mV
  Adjustment range		11 ... 14 V	11 ... 14 V
  Product function Output voltage adjustable		Yes	Yes
  Output voltage setting		via potentiometer	via potentiometer
  Status display		Green LED for 12 V OK	Green LED for 12 V OK
  On/off behavior		Overshoot of Vout < 2 %	Overshoot of Vout < 2 %
  Startup delay, max.		2.5 s	1 s
  Voltage increase time of the output voltage maximum		30 ms	30 ms
  Rated current value Iout rated		3 A	8.3 A
  Current range		0 ... 3 A	0 ... 8.3 A
  ● Note		+50 ... +70 °C: Derating 2.5%/K	+50 ... +70 °C: Derating 2.5%/K
  Supplied active power typical		36 W	100 W
  Parallel switching for enhanced performance		Yes	Yes
  Numbers of parallel switchable units for enhanced performance		2	2
  Efficiency
  Efficiency at Vout rated, Iout rated, approx.		84 %	84 %
  Power loss at Vout rated, Iout rated, approx.		6.5 W	19 W
  Closed-loop control
  Dynamic mains compensation (Vin rated ±15 %), max.		0.5 %	0.5 %
  Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ.		5 %	5 %
  Protection and monitoring
  Output overvoltage protection		< 17.6 V	< 17.6 V
  Current limitation, typ.		3.6 A	9.9 A
  Property of the output Short-circuit proof		Yes	Yes
  Short-circuit protection		Electronic shutdown, automatic restart	Electronic shutdown, automatic restart
  Enduring short circuit current RMS value
  ● typical		6 A	10 A
  Overload/short-circuit indicator		-	-
  Safety
  Primary/secondary isolation		Yes	Yes
  Galvanic isolation		Safety extra low output voltage Vout according to EN 60950-1	Safety extra low output voltage Vout according to EN 60950-1
  Protection class		Class I	Class I
  Leakage current
  ● maximum		3.5 mA	3.5 mA
  ● typical		1 mA	1 mA
  CE mark		Yes	Yes
  UL/cUL (CSA) approval		cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cURus (UL 60950-1, CSA C22.2 No. 60950-1), File E151273	cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cURus (UL 60950-1, CSA C22.2 No. 60950-1), File E151273
  Explosion protection		-	-
  FM approval		-	-
  CB approval		Yes	Yes
  Marine approval		-	-
  Degree of protection (EN 60529)		IP20	IP20
  EMC
  Emitted interference		EN 55022 Class B	EN 55022 Class B
  Supply harmonics limitation		not applicable	EN 61000-3-2
  Noise immunity		EN 61000-6-2	EN 61000-6-2
  Operating data
  Ambient temperature
  ● during operation		-10 ... +70 °C	-10 ... +70 °C
  — Note		with natural convection	with natural convection
  ● during transport		-40 ... +85 °C	-40 ... +85 °C
  ● during storage		-40 ... +85 °C	-40 ... +85 °C
  Mechanics
  Connection technology		screw-type terminals	screw-type terminals
  Connections
  ● Supply input		L, N, PE: 1 screw terminal each for 0.3 ... 1.3 mm² single-core/finely stranded	L, N, PE: 1 screw terminal each for 0.3 ... 1.3 mm² single-core/finely stranded
  ● Output		+, -: 1 screw terminal each for 0.3 ... 1.3 mm²	+, -: 2 screw terminals each for 0.3 ... 1.3 mm²
  ● Auxiliary		-	-
  Width of the enclosure		97 mm	97 mm
  Height of the enclosure		98 mm	158 mm
  Depth of the enclosure		38 mm	38 mm
  Required spacing
  ● top		20 mm	20 mm
  ● bottom		0 mm	0 mm
  ● left		20 mm	20 mm
  ● right		20 mm	20 mm
  Weight, approx.		0.37 kg	0.57 kg
  Installation		Wall mounting	Wall mounting
  Other information		Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)