CPU 1511F-1 PN

• Заказные данные
  (1)
• Аксессуары
  (32)
• Информационные материалы

  Информационные материалы

  • Entry-level CPU in the S7-1500F Controller product range
  • Suitable for standard and fail-safe applications with medium requirements for program scope and processing speed
  • Used as central controller in production lines with central and distributed I/O
  • Supports PROFIsafe in centralized and distributed configuration 
  • PROFINET IO IRT interface with 2-port switch
  • PROFINET IO Controller for operating distributed I/O on PROFINET
  • PROFINET I-Device for connecting the CPU as an intelligent PROFINET device under a SIMATIC or non-Siemens PROFINET I/O controller
  • Isochronous mode

  Note:
  SIMATIC memory card required for operation of the CPU

  Область применения

  The CPU 1511-1 PN is the cost-effective entry-level CPU for standard and fail-safe applications with medium requirements for processing speed and speed of response in discrete production technology. With its RAM size, this CPU is also suitable for medium-sized applications. It can be used as a PROFINET IO controller or as distributed intelligence (PROFINET I-Device). The integrated PROFINET IO IRT interface is designed as 2-port switch so that a linear topology can be set up in the system. In addition, the CPU offers comprehensive control functionalities via easy-to-configure blocks as well as the ability to connect drives via standardized PLC-open blocks.

  Дизайн

  The CPU 1511F-1 PN has:

  • a powerful processor:
    The CPU achieves a command execution time as low as 60 ns per binary command.
  • extensive RAM:
    230 KB for program, 1 MB for data
  • SIMATIC memory cards as load memory;
    permit additional functions such as datalog and archives
  • Flexible expansion possibilities: single-tier configuration with max. 32 modules (CPU + 31 modules)
  • Display with functions for the
    • Display of overview information such as station name, higher level designation, location designation, etc.
    • Display of diagnostic information
    • Display of module information
    • Display of display settings
    • Setting of IP addresses
    • Setting of date and time
    • Selection of the operating mode
    • Resetting of the CPU to factory settings
    • Disabling/enabling of the display,
    • Enabling of protection levels
    • display of safety mode, overall signature and date of the last download with signature change.
  • PROFINET IO IRT interface for connecting distributed I/O via PROFINET
  • Supports PROFIsafe in centralized and distributed configuration

  Функции

  • Performance
    • Faster command processing, depending on the CPU type, language extensions and new data types
    • Even shorter response times of the CPUs due to considerably faster backplane bus
    • Powerful network connection:
      each CPU is equipped with PROFINET IO IRT (2-port switch) as standard interface.
  • Integrated technology
    • Connection of analog and PROFIdrive-capable drives via standardized blocks (PLCopen)
    • Support of speed-controlled and positioning axes as well as external encoders
    • Trace functions for all CPU variables, both for diagnostics in real time as well as for sporadic error detection
    • Comprehensive control functionalities, e.g. easily configurable blocks for automatic optimization of the control parameters for optimum control quality
  • Security Integrated
    • Password-based know-how protection against unauthorized reading and modification of program blocks
    • Copy protection for tying individual blocks to the serial number of the SIMATIC memory card: The block can only run if the configured memory card is inserted into the CPU.
    • 4-level authorization concept:
      Communication to the HMI devices can also be restricted.
    • Manipulation protection:
      The controller recognizes changed or unauthorized transmissions of the engineering data.
  • Design and handling
    • Display of the overview information:
      e.g. station name, plant identifier, location designation, etc., diagnostic information, module information, display settings.
    • Possible operations on the display:
      set addresses, set date and time, select operating mode of CPU, reset CPU to factory settings, disable/enable display, activate protection levels.
  • Integrated system diagnostics
    • System diagnostics information is displayed consistently and in plain text in the display, TIA Portal, HMI devices and web server, even for messages from the drives, and updated even if the CPU is in STOP mode.
    • Integrated in the firmware of the CPU, no special configuration is required
  • SIMATIC memory card (required for operation of the CPU)
    • Used as plug-in load memory or for updating the firmware.
    • Additionally for storing additional documents or csv files (for recipes and archives)
    • Creation of data blocks for storage/reading of data via SFCs of the user program
  • Datalog (archives) and recipes
    • Storage of csv files for recipes and archives on the SIMATIC memory card;
      easy access to plant-relevant operating data using Office tools or via a web server
    • Easy access to configuration data of the machine by means of a web browser or SD card reader (two-way data exchange from and to the controller)
  • Programming of the standard program section
    • Programming with STEP 7 V12 SP1
  • Programming of the fail-safe program section
    • Programming of the safety-related program section with the option package "STEP 7 Safety Advanced". STEP 7 Safety Advanced V12 can run under SIMATIC STEP 7 Professional V12 SP1.

  Технические данные

  Order number		6ES7511-1FK01-0AB0
  		CPU 1511F-1PN, 225KB PROG, 1MB DATA
  General information
  Product type designation		CPU 1511F-1 PN
  Engineering with
  ● STEP 7 TIA Portal configurable/integrated as of version		V14
  Supply voltage
  Type of supply voltage		24 V DC
  Power loss
  Power loss, typ.		5.7 W
  Memory
  Work memory
  ● integrated (for program)		225 kbyte
  ● integrated (for data)		1 Mbyte
  Load memory
  ● Plug-in (SIMATIC Memory Card), max.		32 Gbyte
  CPU processing times
  for bit operations, typ.		60 ns
  for word operations, typ.		72 ns
  for fixed point arithmetic, typ.		96 ns
  for floating point arithmetic, typ.		384 ns
  Counters, timers and their retentivity
  S7 counter
  ● Number		2 048
  IEC counter
  ● Number		Any (only limited by the main memory)
  S7 times
  ● Number		2 048
  IEC timer
  ● Number		Any (only limited by the main memory)
  Data areas and their retentivity
  Flag
  ● Number, max.		16 kbyte
  Address area
  I/O address area
  ● Inputs		32 kbyte; All inputs are in the process image
  ● Outputs		32 kbyte; All outputs are in the process image
  Time of day
  Clock
  ● Type		Hardware clock
  1. Interface
  Interface types
  ● Number of ports		2
  ● integrated switch		Yes
  ● RJ 45 (Ethernet)		Yes; X1
  Functionality
  ● PROFINET IO Controller		Yes
  ● PROFINET IO Device		Yes
  ● SIMATIC communication		Yes
  ● Open IE communication		Yes
  ● Web server		Yes
  ● Media redundancy		Yes
  PROFINET IO Controller
  Services
  — PG/OP communication		Yes
  — S7 routing		Yes
  — Isochronous mode		Yes
  — Open IE communication		Yes
  — IRT		Yes
  — MRP		Yes; As MRP redundancy manager and/or MRP client; max. number of devices in the ring: 50
  — MRPD		Yes; Requirement: IRT
  — PROFIenergy		Yes
  — Prioritized startup		Yes; Max. 32 PROFINET devices
  — Number of connectable IO Devices, max.		128; In total, up to 256 distributed I/O devices can be connected via AS-i, PROFIBUS or PROFINET
  — Of which IO devices with IRT, max.		64
  — Number of connectable IO Devices for RT, max.		128
  — of which in line, max.		128
  — Number of IO Devices that can be simultaneously activated/deactivated, max.		8; in total across all interfaces
  — Number of IO Devices per tool, max.		8
  — Updating times		The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data
  Update time for IRT
  — for send cycle of 250 µs		250 μs to 4 ms; Note: In the case of IRT with isochronous mode, the minimum update time of 625 µs of the isochronous OB is decisive
  — for send cycle of 500 µs		500 μs to 8 ms; Note: In the case of IRT with isochronous mode, the minimum update time of 625 µs of the isochronous OB is decisive
  — for send cycle of 1 ms		1 ms to 16 ms
  — for send cycle of 2 ms		2 ms to 32 ms
  — for send cycle of 4 ms		4 ms to 64 ms
  — With IRT and parameterization of "odd" send cycles		Update time = set "odd" send clock (any multiple of 125 µs: 375 µs, 625 µs ... 3 875 µs)
  Update time for RT
  — for send cycle of 250 µs		250 µs to 128 ms
  — for send cycle of 500 µs		500 µs to 256 ms
  — for send cycle of 1 ms		1 ms to 512 ms
  — for send cycle of 2 ms		2 ms to 512 ms
  — for send cycle of 4 ms		4 ms to 512 ms
  PROFINET IO Device
  Services
  — PG/OP communication		Yes
  — S7 routing		Yes
  — Isochronous mode		No
  — Open IE communication		Yes
  — IRT		Yes
  — MRP		Yes
  — MRPD		Yes; Requirement: IRT
  — PROFIenergy		Yes
  — Shared device		Yes
  — Number of IO Controllers with shared device, max.		4
  Protocols
  Supports protocol for PROFINET IO		Yes
  PROFIsafe		Yes
  PROFIBUS		No
  Number of connections
  ● Number of connections, max.		96; via integrated interfaces of the CPU and connected CPs / CMs
  PROFINET IO Controller
  Services
  — Number of connectable IO Devices, max.		128; In total, up to 256 distributed I/O devices can be connected via AS-i, PROFIBUS or PROFINET
  — Of which IO devices with IRT, max.		64
  — Number of connectable IO Devices for RT, max.		128
  Isochronous mode
  Isochronous operation (application synchronized up to terminal)		Yes; With minimum OB 6x cycle of 625 µs
  Supported technology objects
  Motion Control		Yes; Note: The number of axes affects the cycle time of the PLC program; selection guide via the TIA Selection Tool or SIZER
  Controller
  ● PID_Compact		Yes; Universal PID controller with integrated optimization
  ● PID_3Step		Yes; PID controller with integrated optimization for valves
  ● PID-Temp		Yes; PID controller with integrated optimization for temperature
  Counting and measuring
  ● High-speed counter		Yes
  Highest safety class achievable in safety mode
  Probability of failure (for service life of 20 years and repair time of 100 hours)
  — Low demand mode: PFDavg in accordance with SIL3		< 2.00E-05
  — High demand/continuous mode: PFH in accordance with SIL3		< 1.00E-09
  Ambient conditions
  Ambient temperature during operation
  ● horizontal installation, min.		0 °C
  ● horizontal installation, max.		60 °C; Display: 50 °C, at an operating temperature of typically 50 °C, the display is switched off
  ● vertical installation, min.		0 °C
  ● vertical installation, max.		40 °C; Display: 40 °C, at an operating temperature of typically 40 °C, the display is switched off
  Configuration
  Programming
  Programming language
  — LAD		Yes; incl. failsafe
  — FBD		Yes; incl. failsafe
  — STL		Yes
  — SCL		Yes
  — GRAPH		Yes
  Know-how protection
  ● User program protection/password protection		Yes
  ● Copy protection		Yes
  ● Block protection		Yes
  Access protection
  ● Password for display		Yes
  ● Protection level: Write protection		Yes
  ● Protection level: Read/write protection		Yes
  ● Protection level: Complete protection		Yes
  Dimensions
  Width		35 mm
  Height		147 mm
  Depth		129 mm
  Weights
  Weight, approx.		430 g

  
  

  Дальнейшая информация

  Further information and downloads

  Safety Integrated

  Information on functional safety, also for S7-1500F Controllers:

  http://www.siemens.com/safety-integrated

  Manuals

  The SIMATIC S7-1500 manuals can be downloaded free of charge from the Internet (SIMATIC Customer Support, http://www.siemens.com/automation/support).

  General information

  http://www.siemens.com/S7-1500

  SIMATIC Selection Tool

  http://www.siemens.com/tia-selection-tool

  Brochures

  Information material for downloading can be found on the Internet:

  http://www.siemens.com/simatic/printmaterial